North American and Pelican Nebulae Full Size Image here (opens in a new tab).This my first semi-completed image from the QHY268C and so far I am impressed with its performance.  I discuss unboxing the camera and also how I connect it to the FSQ85 in other posts on my site.This image – above – of The North American and Pelican Nebulae is a stack of 47 x 180s exposures at Gain 0 and Offset 30 at -15C on my Takahashi FSQ85. This is my first deep-sky CMOS camera and I had to research how to preprocess the data from the camera and I will discuss this in another post.Since I acquired the camera and in keeping with the “new gear curse”, I have been constantly frustrated by wet weather and cloudy skies for almost a month.  The 47 exposures for this image were spread out over about seven imaging sessions,…

The California Nebula – NGC 1499 – is a vast hydrogen gas emission nebula about 1000 light years away in the constellation of Perseus.  It is named as such because of its vague resemblance to the US state of California.It is a very large, faint and diffuse object, about four times the diameter of the moon.  It is almost completely invisible visually without specialist filters and was not discovered until the advent of astrophotography in 1884.  The nebula shines by reflecting the light of the bright star Markib.  It shines red because Hydrogen atoms, when excited by nearby bright sources like stars, emit or re-radiate light at the 656nm wavelength which is in the red part of the spectrum to our eyes. The California Nebula Image Technical Data The California Nebula is so large that most telescopes cannot get the nebula in the field of view, nowhere near in fact. …

Introduction I’ve bought a QHY268C colour CMOS camera and a QHYOAG-M as discussed in my post here.  As I explain in that post, my intention is to connect this up to my Takahashi FSQ85 “BabyQ” and make it an extensible system so that with easy and minor changes I can also connect the camera/OAG assembly to my Williams Optics Redcat 51, Samyang 135mm lens and maybe other optical systems (although its primary use will be on the FSQ85).  I also explain in that post how to configure the QHY268C and the OAG assembly such that both camera and guide camera can both reach focus simultaneously by “padding” out the camera side of the OAG with about 13mm of spacers between the OAG and the camera in order to get both cameras to simultaneously focus.I now needed to determine a way  to mount the OAG-QHY268C assembly via a threaded method to…